Imagine Monitor

This is the primary detection service for imagine.

flowchart TD
    B>V4L2 Input Device] --> I[[Imagine Service]]
    I --> V[Video Stream Websocket]
    I --> D[Detections Websocket]
    V --> N{{Webserver}}
    D --> N
    U((Web browser / User)) --> N

It pulls video frames from video

Deploying

You can build an image using docker build .

Multi-arch images

docker buildx build --progress=plain --platform linux/arm64,linux/amd64 -t vontakach/imagine:latest --push .

Notes

Multicast is used so we can process the video in different ways without having to encode it multiple times

# enable multicast on loopback device
ifconfig lo up
sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev lo

to consume multicast video in docker you need use the host network (or the multicast source must come from another container)
docker on windows or mac will NOT WORK as they are virtualising linux and running in a bridged network
WSL on windows will also not work as you can't run kernel modules such as V4L2 loopback devices

For loopback support

sudo apt-get install v4l2loopback-dkms

# create two loopback devices
sudo modprobe v4l2loopback devices=2

# to configure this to persist after a reboot
echo v4l2loopback | sudo tee -a /etc/modules-load.d/v4l2loopback.conf
echo "options v4l2loopback devices=2" | sudo tee -a /etc/modprobe.d/v4l2loopback.conf

For replay support, you'll need to have setup the ramdisk unless you want to run as root

sudo mkdir -p /mnt/ramdisk
sudo mount -t tmpfs -o size=512M tmpfs /mnt/ramdisk

export REPLAY_MOUNT_PATH=/mnt/ramdisk

# to configure this to persist after a reboot
echo "tmpfs       /mnt/ramdisk   tmpfs   size=512M   0  0" | sudo tee -a /etc/fstab

# can test this config with (unmount if ramdisk already mounted)
sudo umount /mnt/ramdisk
sudo mount -a

Launch imagine monitor

# What video input should be used
# can get this list of formats: v4l2-ctl -D --list-formats-ext --device /dev/video0
# we expect YUYV format
export INPUT_DEVICE=/dev/video0
export INPUT_WIDTH=640
export INPUT_HEIGHT=480

# What address should be used to stream the video on
export MULTICAST_ADDRESS=224.0.0.1
export MULTICAST_PORT=1234

# Enable the detection model
export MODEL_PATH="./tf-models/efficientdet_lite0_320_ptq.tflite"
# Or specify a URI
# export MODEL_URI=https://raw.githubusercontent.com/google-coral/test_data/master/efficientdet_lite0_320_ptq_edgetpu.tflite
# export LABELS_URI=https://raw.githubusercontent.com/google-coral/test_data/master/coco_labels.txt
export LABELS_FILE=./tf-models/coco_labels.txt

# Enable or disable certain features
export ENABLE_STREAMING=true
export ENABLE_DETECTOR=true
export ENABLE_EDGETPU=true
export ENABLE_REPLAY=true

# start the process
./bin/monitor

Then can watch the stream over

Multicast udp://@224.0.0.1:1234
Web Browser http://<ip-address>:3000/mpegts.html

Generate Keys

If you would like to run local development over self signed HTTPS

openssl req -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -sha256 -days 365
openssl pkey -in key.pem -out cert.key
openssl crl2pkcs7 -nocrl -certfile cert.pem | openssl pkcs7 -print_certs -out cert.crt
rm *.pem

Other notes

Currently running containers as root for access to Coral USB TPU hardware. Need work out udev rules for enabling access to the user in the container.

echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="1a6e", ATTRS{idProduct}=="089a", MODE="0666", GROUP="plugdev"' | sudo tee /etc/udev/rules.d/65-coral-usb-accelerator.rules
echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="9302", MODE="0666", GROUP="plugdev"' | sudo tee -a /etc/udev/rules.d/65-coral-usb-accelerator.rules

Something like this, outside and within the container. (The product ID changes from Global Unichip Corp to Google Inc)